3D modelling

Post mods you have finished or are working on here.

Moderators: Balthagor, Legend, Moderators

Post Reply
User avatar
number47
General
Posts: 2655
Joined: Sep 15 2011
Human: Yes
Location: X:913 Y:185

Re: 3D modelling

Post by number47 »

If it's not Messerschmitt Me P.1101/99, I give up for this round as there are too many projects that "look like it but are not quite like it", as always some detail is just a bit different :lol:
"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

It is a Me P.1101/99 or at least the sources I used where of that aircraft. Also yes the problem with these paper projects is that depending on what source you use there are minor differences.
SGTscuba
General
Posts: 2544
Joined: Dec 08 2007
Location: Tipton, UK

Re: 3D modelling

Post by SGTscuba »

:-) :-)

I approve (and I couldn't guess this one either)
My SR:U Model Project, get the latest and post suggestions here:

http://www.bgforums.com/forums/viewtopi ... 79&t=28040
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

I find the Me P.1101/99 an interesting idea as it is basically this large extremely hard hitting flying anti-tank cannon. Even the 5 secondary 55mm cannons would be effective at destroying enemy armour and that is on top of the 7.5cm PAK 40. This really would be a jet-powered HS-129B-3 taken to the extreme.

Anyway next aircraft.
Image
note that on some illustrations the side window for the rear seat is round and on others there might be a few smaller rectangular ones instead. I went with the versions that have a single large one.

Also FYI I found an issue with aircraft 12 that needs fixing before I will post it so the planned more difficult aircraft 12 might end up being replaced with something else (and likely easier).
User avatar
number47
General
Posts: 2655
Joined: Sep 15 2011
Human: Yes
Location: X:913 Y:185

Re: 3D modelling

Post by number47 »

This one is easy 8) ...F-108 or more precisely North American XF-108 Rapier :D

Though to be fair, I ran into it yesterday while trying to identify aircraft 10...searching for Me P.1101/99 broadened my aircraft identification powers immensely :lol:
"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
User avatar
sparky282
Colonel
Posts: 384
Joined: Dec 31 2011
Human: Yes

Re: 3D modelling

Post by sparky282 »

what you have posted so far is incredible keep up the good work :-)
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

Well it is limited how long I can keep this going as I am by no means making one a day.

Also this Aircraft 12 is not the one I originally planned to use but honestly it makes no difference.
Image
User avatar
number47
General
Posts: 2655
Joined: Sep 15 2011
Human: Yes
Location: X:913 Y:185

Re: 3D modelling

Post by number47 »

Aircraft 12

Japanese YS-11EB...
"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

This one should not be too hard.
Image
I might end up adjusting the rocket pods I have not decided yet.
User avatar
number47
General
Posts: 2655
Joined: Sep 15 2011
Human: Yes
Location: X:913 Y:185

Re: 3D modelling

Post by number47 »

Grach :D
"If everyone is thinking alike, someone isn't thinking."
- General George Patton Jr
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

Yes it is a Su-25.

This one is arguably even easier but I did not pick it due to difficulty of identification so that is just a side-effect.
Image
SGTscuba
General
Posts: 2544
Joined: Dec 08 2007
Location: Tipton, UK

Re: 3D modelling

Post by SGTscuba »

E2 Hawkeye
My SR:U Model Project, get the latest and post suggestions here:

http://www.bgforums.com/forums/viewtopi ... 79&t=28040
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

Indeed it is a Grumman E2 Hawkeye.

Also I did a major upgrade of my desktop computer. The only thing that is left is the SSD's and power supply. Even the cabinet had to go as the old one did not support a 360mm cooler. It should be a quite capable graphics workstation assuming I end up using it for that instead of my Macbook pro.

It will probably take a bit of time getting it up and running as I had to upgrade from 7 to 10 as my motherboard only supports 10. So far though I find windows 10 Home quite infuriating. I hate how update works for one and just for the record I refuse to pay microsoft for the privilege of not having it do whatever it want whenever it want. Using backdoor methods will also only get me so far.
So far I rate it somewhere around 8 or Me.

Interestingly Windows activation managed to max out an i9 9900K for over a minute!


Basically I will have to use some time to either get windows up and running or find alternatives if I end up ditching it completely. I will however still have my virtual 7.
Nerei
General
Posts: 1354
Joined: Jan 11 2016
Human: Yes

Re: 3D modelling

Post by Nerei »

Also aircraft 15
Image
Probably a bit more difficult than 14 but nowhere near say 10.
SGTscuba
General
Posts: 2544
Joined: Dec 08 2007
Location: Tipton, UK

Re: 3D modelling

Post by SGTscuba »

B47 Stratojet?
My SR:U Model Project, get the latest and post suggestions here:

http://www.bgforums.com/forums/viewtopi ... 79&t=28040
Post Reply

Return to “Modding Show & Tell”